DEFINITION OF THE PRODUCT: Finish paint, basically made of acrylic resins, chemically inert pigments and an isocyanate hardener
DESTINATION OF THE PRODUCT: acrylic finish made of two components for ferrous metals, piping, machinery, tanks of hydrocarbon storage, etc…) to be used after the rustproof and the epoxy primer. It is characterized with an excellent holding against ageing and UV rays, especially in a maritime, industrial or rural ambiance.
CHARACTERISTICS OF THE PRODUCT BEFORE USING IT:
Tint: white and tints upon request.
Aspect: stretched brilliant
Density: 1,20+_0,1 in white, variable according to the tints
Viscosity upon delivery: 90s+_10s AFNOR No4 at 20 degrees Celsius
Presentation: -Base: 1 gallon, 3 gallons, 10 gallons
-Hardener: 1kg, 20kg
Dosage ratio: 20kg/5kg
Storage: 6 months in the pack, closed and away from bad weather
Sanitary precautions: Wearing gloves, glasses and a mask
Adherence: 90% +_10
Folding: good at 9 mm
Stamping: good at 9mm
Shock: good 1,5kg 25cm
Persoz hardness: superior or equal to 150s after 48 h
Table of using the product
SUPPORT | SURFACE PREPARATION |
Ferrous metals | Degreasing Descaling Sand blasting SA2 ½ |
LAYERS SYSTEM
Designation | Thickness of the dry film | Way of using the product |
Red brown epoxy rustproof Grey epoxy primer Two-component acrylic finish | 40-50m 40-50m 40-50m | Pneumatic pistol, airless, brush, roller Pneumatic pistol, airless, brush, roller Pneumatic pistol, airless, brush, roller |
Very important remark: this product is delivered in two components to be mixed at the moment of using it. Once done, the mixture is preserved for 6 h at a temperature of 25 degrees Celsius (Pot lif). You should homogenate the two components and wait 10 mn before application.
This product is to be used in the outside. It has an excellent holding against UV, especially in maritime, industrial and rural ambiance on metallic supports (trucks, tanks of hydrocarbon storage) as well as in the inside (machineries, piping, etc.)
CHARACTERISTICS OF USING THE PRODUCT:
Make the mixture: Base 20 kg, hardener: 5kg. Homogenate well and wait 10 mn.
Application | Brush-roller | Pneumatic pistol | Airless pistol |
Viscosity CA 4 | 80s-90s | 20s-25s | 50s-60s |
Diluents | Cellulosic | Cellulosic | Cellulosic |
Percentage | / | 10-15 | 3-5 |
The covering power is given for information. The real covering powers depend on the cleverness of the person applying it, the nature of the support (straight or porous) and the work conditions | Brush- roller | Pneumatic pistol | Airless pistol |
Productivity M2/KG | 8-10 | 12-14 | 6-8 |
Thickness of a humid film | 80 | 60 | 100 |
Thickness of a dry film in u | 45-50 | 25-35 | 50-55 |
LIMITED AMBIENT CONDITIONS
Temperature: 10 degrees Celsius Hygrometry: 80% max
Drying at a temperature of: 20 degrees Celsius
HP: 45mn Dry: 6h Dry hard: 24h
TIME INTERVALS BETWEEN LAYERS
Min: 24 hours
Max: 48 hours
CHARACTERISTICS OF A DRY FILM
NOTE: The characteristics of our products are published for general information. In case the circumstances of using the product go beyond our control, we decline any responsibility for any eventual damage
